Home > News > Reasons and Solutions For The General Faults Of Reduction Gears

News

Reasons and Solutions For The General Faults Of Reduction Gears
2013-07-15 09:26:01
 

 

Solutions And Reasons For The General Faults Of Reduction Gears
?   ?
Fault Description Reasons Solutions
?   ?
? Overload. Adjust to proper loading.
Overheating Over friction of oil seal. Drop lubricant at oil seal.
? Improper connection between driving shaft
and the transmission device.
Adjust to proper position.
? Large impact loading. Use larger reduction gears.
?   ?
? Overload. Adjust to proper loading.
Noise Bearing damaged or too large clearance. Replace bearing.
? Lubricant oil shortage or deterioration. Fill in adequate lubricant oil as idication. 
? Improper connection between driving shaft
and the transmission device. 
Adjust to proper position.
? Bolt loose. Tighten bolt.
? Improper installation of transmission device. Fix transmission device properly.
?   ?
? Oil seal damaged. Replace oil seal.
Oil leakage Too much oil. Fill in adequate lubricant oil as indication.
? Screw loose. Tighten screw.
? Outside shell fractured. Replace outer shell.
?   ?
? Overload. Adjust to proper loading.
Driving shaft  Bearing damaged. Replace bearing.
cannot rotate Invasion by foreign objects. Take out foreign objects.
? Gear worn-out. Replace gear.
? Motor out of order. Repair motor.
? Incorrect wiring. Wiring as indication.
? Large impact loading. Use larger reduction gears.
1. The above items are general fault descriptions. ?
 In case of other kinds of faults, please contact with us to obtain most correct services.
2. If the product has been broken off or changed, the unusual matter the company won't be in charge of the case.

Previous   [Return Home] [Print] [Go Back]   Next

Contact Us

  • Tel:

    008613760859053...............(Mob / whatsapp:)
  • Contact: Mr.Leo Zhang
  • Fax:

    008675786698261
  • E-mail:

    sales@yygear.com
?????????